Usage Instructions & Tips

TO REMOVE
MOST STAINS:

dilute Kleen Warrior
2 to 30 with cold water;

moisten the stained area;

leave for a few seconds;

wipe dry and repeat
if necessary.

 

Kleen Warrior will
remove the following common types of stains:

 

soft drinks
chocolate

tea

coffee

milk

cream

fruit juices

alcoholic drinks
beverages

blood

ink

lipstick

cosmetics

mascara

grass
gravy

ice cream

iodine

jam and jelly

ketchup

adhesive
tape

margarine,

butter

shoe polish

salad dressing
mayonnaise

pencil and crayon marks

soap

spaghetti sauce

urine

soups
mustard,

egg and more.

 


FOR PRE-WASH AND LAUNDRY:

To boost cleaning power of regular detergents (powder or liquid)

on grass stained
clothes, work clothes, diapers, grease spots,

or heavily soiled
clothes, add 2 oz's of Kleen Warrior with regular load.

For tough stains,
dilute Kleen Warrior 2 parts to 10 parts water and

moisten problem
area, rub in and wait a few minutes, put in washer as usual.


 


TO CLEAN BOATS, MOTORCYCLES, ETC:

1. Dilute Kleen Warrior 2 oz. to 7 oz. water.
2. Apply with cloth or sponge, working soil loose.
3. Rinse thoroughly with pressure hose.

Buff surface dry.
(Do not clean metal in direct sun or when metal is hot.)

 


TO CLEAN METAL SURFACES:

For mobile homes, aluminum sidings, gutters,

camping, trailers,
rvs, and semi-tractors:
1. Dilute Kleen Warrior 2 oz to 30 oz water.

(if oxidation, water spots, mildew, grease, oil or diesel oil is present,

dilute 2 oz to 10 oz of water.)

2. Dip sponge (sponge mop for higher areas) into solution and wipe clean.

3. Spray mist with hose and let dry or towel buff dry.

Spray with liquid
wax such as Turtle Wax to bring out shine.

 


TO CLEAN FLOORS:

Cleans all washable floors, including no-wax floors, linoleum, vinyl, ceramic
tile,and all smooth painted, and unpainted surfaces.
1. Dilute Kleen Warrior 2 oz to 30 oz water

or 8 oz per gallon
in warm water.
2. Pre-soak heavily stained area and allow five minutes to soak.
3. Mop floor and allow to dry.



TO STRIP LINOLEUM TILE AND WOOD FLOORS:

1. Dilute Kleen Warrior 2 oz with 10 oz water,

1 to 4 for heavily
waxed floors.
2. Sponge mop floor
3. Let stand three to four minutes
4. Use Scotch Brite scour pad if done by hand or strip with abrasive buffer.
5. Mop and let dry.

 



TO CLEAN AIR CONDITIONING COIL:

Dirty condenser coil is a major source of compressor failure.

Kleen Warrior can
help you avoid this costly repair.
1. Dilute Kleen Warrior 2 oz to 10 oz water.
2. Always turn Power Switch to OFF.
3. Spray into top of coil starting at top moving to the bottom.
4. Let stand five minutes.
5. With garden hose spray coil off.
6. Turn power back on.
WAIT 30 MINUTES TO START UNIT.






 





INSTRUCTIONS & TIPS on KLEEN
WARRIOR CLEANER:


Kleen Warrior can be used as a mild spray solution or a full strength wash.

Just adjust the strength to fit your particular cleaning job.

Start with recommended dilutions, but you may find it necessary to use more or less cleaner for
varying cleaning problems. For the small job, apply Kleen warrior to damp cloth
or sponge and wipe. For the very tough job on hard surfaces, dilute Kleen
Warrior 1 to 5 and use Scotch Brite scour pads as needed on barbecue grills,
stoves, burners, ovens, grates, pots and pans, buildup of soap, mold and mildew
on bathroom shower.
Recreational equipment such as vans, campers, boats, RV's, tents,

sleeping bags,
hunting, fishing, and sporting equipment can benefit from

the use of Kleen
Warrior for exterior cleaning problems, and interior cleaning of carpets,
ovens, upholstery and mildew.

Great for removing
stains of alcoholic beverages.

Kleen Warrior will
remove tree stains, mildew, mold and dirt

from portable
awnings on mobile homes and semi-tractors.

Great for any
baked-on enamel surface.


 

GENERAL CLEANING:
Kleen Warrior dilutes 2 oz. to 30 oz. of water as

General All Purpose
Cleaning Mixture.

Spray your counter
tops, furniture, paneling, woodwork, walls,

upholstery,
appliances, light fixtures, ceramics, patio and

pool furniture,
venetian blinds and metal surfaces.

Spray mist and wipe
dry.


Kleen Warrior may be used full strength for tough problems such as:

rust

road tar
driveway cleaning

degreasing car engines

glue

soap buildup
blood stains.

Apply to area to be
cleaned and let sit for up to five minutes,

then wipe off with
clean cloth.

On any metal surface
such as motorcycles, house siding, autos,
trucks, etc.,

do not use full strength in hot sun or while surface is hot.

Spray off immediately with hose.

If surface is hot,
let it cool down, spray with cold water hose

and then apply Kleen
Warrior.



CLEANING SMEAR PROOF
WINDOWS AND MIRRORS:


1. Apply Kleen Warrior diluted 2 oz to 1 gallon (129 oz) water

with spray mist or
cloth.
2. Use clean, dry cloth to buff glass completely dry.

This mixture can
also be used for windshields, bathroom mirrors,

motorcycle guards,
swimming masks or goggles,

eye glasses, TV
screens, ceiling fixtures, etc.

Cleans and protects
in a single action.

Helps prevent 85-90%
of unwanted fingerprints.


PLASTIC, PLEXIGLASS, FIBERGLASS, VINYL:

Kleen Warrior diluted 2 oz. to 30 oz.

water is an
excellent cleaner of all plastic products,

for porous and
textures surfaces. Use a soft brush for all problem areas



HIGH PRESSURE SPRAYERS AND STEAM CLEANERS:

Kleen Warrior is an ideal product for high pressure steam cleaning
applications.

Kleen Warrior will
keep nozzles clean and free from corrosion.

Maintenance and down
time are greatly reduced in spray applications,

either hot or cold
water may be used.

The higher a water
temperature pressure the lighter the mixture required.

The following chart
is a guideline of recommended dilutions.

These suggested
dilutions should be modified as necessary to achieve maximum economy with the
desired effectiveness.

 

 

Pressure Cold Water Temp Dilutions:


150-300 PSI      100 F - 130 F       1 - 50

 

500 - 800 PSI      100 F - 130 F      1 -100


1,000 PSI            100 F - 130F       1- 400

 

 

 

 

 

 

TO CLEAN OVENS, STOVES, AND GRILLS:


1. Bring up to warm touch

2. Dilute Kleen Warrior 1 part to 10 parts water.

1 part to 5 parts water if heavily soiled.

3. Next, heat up to 110 degrees for five minutes.
4. Let cool and wipe thoroughly using clean damp cloth.

Use Scotch Brite
scour pad if needed.

 

TO DEGREASE CAR ENGINES:

1. Dilute Kleen Warrior 1 part to 5 parts water.

2. Spray on engine or engine parts when cool.
3. Let stand five minutes for Kleen Warrior to break up

grease, oil and,
soil.
4. Rinse wth hose.


TO CLEAN JEWELRY (DIAMONDS, GOLD, SILVER):

For the ultimate cleaning and care of fine jewelry, Kleen Warrior is a must.
Dilute 1 oz Kleen Warrior to 10 oz's of water in a bowl or jar. Immerse jewelry
for five minutes. Remove and scrub with a soft brush. Rinse with water and buff
dry with cotton cloth. The shine and sparkle will amaze you
.

 

 

 

TO CLEAN FURNITURE UPHOLSTERY AND AUTO INTERIOR:

Note: Always test for colorfastness when using Kleen Warrior on carpets,
upholstery, fabrics and spot cleaning.

1. Vacuum area to be cleaned.

2. Dilute Kleen Warrior 2 oz's to 30 oz's of water.
3. Spray mist Kleen Warrior on surface,

let stand for one
minute and wipe or pat dry with clean cloth.

Repeat as necessary.


 


TO CLEAN
VENETIAN BLINDS:


1. Remove blinds.

2. Hang on clothes line or lay on flat surface.
3. Dilute Kleen Warrior 2 oz's to 30 oz's water.
4. Spray mist starting at top and proceeding to bottom.
5. Let stand for five minutes.
6. Spray off with water hose

 

 

 


TO CLEAN VINYL AND CONVERTIBLE TOPS:
1. Dilute Kleen Warrior 2 oz's to 30 oz's of water.

If heavily soiled, 3
oz's to 30 oz's of water.

2. Spray mist Kleen Warrior over area to be cleaned. (Work in small area).
3. Scrub top with brush giving Kleen Warrior time to break up

soil and mildew.
4. Rinse with clean water.




TO REMOVE
CHEWING GUM, CANDLE WAX OR HARD GLUE:

Take a pin or sharp instrument and punch holes in object.

Dilute
Kleen Warrior 1 oz to 15 oz. of water,

spray on
object and let stand for two minutes to emulsify.

Use nylon
brush to help remove.



TO CLEAN CARPET WITHOUT MACHINE:
1. Vacuum carpet.
2. Dilute 1 part Kleen Warrior to 10 parts water for badly soiled carpet.

For regular carpet cleaning use 1 part Kleen Warrior to 15 parts water.
3. Apply with soft bristle or sponge mop to loosen soil.
4. Wipe badly soiled areas with clean towel, if necessary.





TO CLEAN CARPET WITH MACHINE:

(Machine with Rotary Brushes is Best)
1. Vacuum carpet.
2. Dilute Kleen Warrior 1 part to 15 parts. Pre-spot heavily soiled areas.

3. Add same mixture to machine.(For best results lightly spray a 12x12 area before using machine) this
gives Kleen Warrior time to break up soiled area.

4. Use machine at a slow pace

 

                        CARPETING:

    Note: Always test for colorfastness when        using Kleen Warrior
on carpets,
upholstery, fabrics, and spot cleaning.

Kleen Warrior can be
used to clean carpeting,

etither as an
individual stain, or can be used to do an entire room.

Some of the common
stains Kleen Warrior can remove are:

grease, wine,
liquor, soda, pet stains, gum, oil coffee, glue,

paint, grape jucie,
candle wax, some inks, vomit, water stains and hair dye.



TO REMOVE
STAINS FROM CARPETING:


1. Spray a solution of 1 part Kleen Warrior to

15 parts water onto
stain; let stand 20 seconds.

2. Cover with towel; step on it with a twisting motion to soak up stain.

3. Rub dry with second towel; repeat if necessary until stain is removed.